content is empty!
Color: | |
---|---|
Material: | |
Availability: | |
Quantity: | |
MK-00797694+00632555
MINKANG
8508 7090
——
1.Zelmer Vacuum Cleaner Filter Kit ZVCA752X Separator + HEPA Filter.
2.The kit includes: container separator filter (II) ZVCA752X (A9190088.00, 00797694) and output HEPA filter 919.0080 (00632555).
3.Compatible with models:
Zelmer ZVC752SP(919.0SP)......
4.This Filter set includes the ZVCA752X 00797694 filter and the HEPA Filter 00632555 filter, and is specially designed for some models of vacuum cleaners from Zelmer and Bosch. HEPA filters can effectively filter out tiny particles such as dust, pollen, and pet dander, improving indoor air quality. The ZVCA752X 00797694 filter screen may serve as a pre-filter screen or auxiliary filter screen, helping to intercept larger particles and protect the HEPA filter screen.
5.Replacement cycle and maintenance
——Replacement cycle: The replacement cycle of HEPA filters usually depends on the frequency of use and environmental conditions. Generally speaking, it is recommended to replace the HEPA filter every 3 to 6 months to ensure its filtering effect. The replacement cycle of the ZVCA752X 00797694 filter screen may be relatively short, depending on its material and filtration effect.
——Maintenance suggestion: Regular cleaning of the filter screen can extend its service life. For washable filter screens (such as certain types of sponge filter screens), they can be rinsed with clean water, dried and reused. However, for non-washable filters such as HEPA filters, water washing should be avoided to prevent damage to their structure.
——
1.Zelmer Vacuum Cleaner Filter Kit ZVCA752X Separator + HEPA Filter.
2.The kit includes: container separator filter (II) ZVCA752X (A9190088.00, 00797694) and output HEPA filter 919.0080 (00632555).
3.Compatible with models:
Zelmer ZVC752SP(919.0SP)......
4.This Filter set includes the ZVCA752X 00797694 filter and the HEPA Filter 00632555 filter, and is specially designed for some models of vacuum cleaners from Zelmer and Bosch. HEPA filters can effectively filter out tiny particles such as dust, pollen, and pet dander, improving indoor air quality. The ZVCA752X 00797694 filter screen may serve as a pre-filter screen or auxiliary filter screen, helping to intercept larger particles and protect the HEPA filter screen.
5.Replacement cycle and maintenance
——Replacement cycle: The replacement cycle of HEPA filters usually depends on the frequency of use and environmental conditions. Generally speaking, it is recommended to replace the HEPA filter every 3 to 6 months to ensure its filtering effect. The replacement cycle of the ZVCA752X 00797694 filter screen may be relatively short, depending on its material and filtration effect.
——Maintenance suggestion: Regular cleaning of the filter screen can extend its service life. For washable filter screens (such as certain types of sponge filter screens), they can be rinsed with clean water, dried and reused. However, for non-washable filters such as HEPA filters, water washing should be avoided to prevent damage to their structure.
How to replace the ZEHPA filter screen?
——Power-off and disassembly preparation
Turn off the power of the vacuum cleaner and unplug it to ensure safety.
Refer to the vacuum cleaner manual to find the position of the filter screen (usually behind or at the top of the dust box).
If the filter screen has clips or fixing devices, follow the instructions in the manual for safe disassembly (such as gently pushing the clips, rotating the fixing ring, etc.).
——Remove the old filter screen
Carefully remove the old filter screen to avoid dust scattering.
If there are sealing rings or auxiliary components around the filter screen, it is necessary to check at the same time whether they need to be replaced or cleaned.
——Install a new filter screen
Align the new filter screen with the slot or fixed position in the filter screen compartment, and gently push it in or rotate it to fix it.
Make sure the filter screen is installed properly without any loosening or misalignment.
If the filter screen has direction markings (such as arrows), it should be installed in the direction indicated.
——Test and Reset
Reassemble the vacuum cleaner, plug it in and turn it on for testing.
Check whether the suction is normal and whether the filter screen is installed firmly.
If the vacuum cleaner has a filter replacement prompt light, you need to reset the prompt according to the manual (such as holding down a specific button for a long time).
——Follow-up maintenance
Regularly clean the dust on the surface of the filter screen (if the filter screen can be cleaned).
The filter screen should be replaced every 3 to 6 months depending on the usage frequency and environmental conditions.
Avoid washing non-washable filter screens with water to prevent damage to the structure.
How to replace the ZEHPA filter screen?
——Power-off and disassembly preparation
Turn off the power of the vacuum cleaner and unplug it to ensure safety.
Refer to the vacuum cleaner manual to find the position of the filter screen (usually behind or at the top of the dust box).
If the filter screen has clips or fixing devices, follow the instructions in the manual for safe disassembly (such as gently pushing the clips, rotating the fixing ring, etc.).
——Remove the old filter screen
Carefully remove the old filter screen to avoid dust scattering.
If there are sealing rings or auxiliary components around the filter screen, it is necessary to check at the same time whether they need to be replaced or cleaned.
——Install a new filter screen
Align the new filter screen with the slot or fixed position in the filter screen compartment, and gently push it in or rotate it to fix it.
Make sure the filter screen is installed properly without any loosening or misalignment.
If the filter screen has direction markings (such as arrows), it should be installed in the direction indicated.
——Test and Reset
Reassemble the vacuum cleaner, plug it in and turn it on for testing.
Check whether the suction is normal and whether the filter screen is installed firmly.
If the vacuum cleaner has a filter replacement prompt light, you need to reset the prompt according to the manual (such as holding down a specific button for a long time).
——Follow-up maintenance
Regularly clean the dust on the surface of the filter screen (if the filter screen can be cleaned).
The filter screen should be replaced every 3 to 6 months depending on the usage frequency and environmental conditions.
Avoid washing non-washable filter screens with water to prevent damage to the structure.