 |
| Color: | |
|---|---|
| Material: | |
| Quantity: | |
MK-VF3800
MINKANG
8508 7090
Replacement Pleated HEPA Wet Dry Vac Shop Vacuum Filter compatible with Most 3-4.5 Gallon RIDGID Wet Dry vacuum cleaner parts,Model # VF3800
1. Fits most RIDGID wet dry vacuums 3 to 4.5 gal.
2. Durable HEPA vacuum filter can be used for wet and dry messes
3. 99.97% efficient at filtering dry particles 0.3 µm or larger
4. About This Product
The RIDGID Pleated HEPA Filter is designed to fit most RIDGID wet dry vacuums (3 to 4.5 gal.) to capture wet and dry messes. It can also be used with the RIDGID Ash and Grilling Vacuum (HDAV0500) to pick up cold ash.
5.Compatible with the RIDGID ash and grilling vacuum HDAV0500 for cold ash pickup only - not for drywall dust, fine powders or liquids pickup. Must be used within the RIDGID ash vac drum filter (VFA0500; sold separately) if using with the RIDGID ash and grilling vacuum. Do not operate without both filters installed
Compatible Models
WD4050, WD4070, WD4080, WD4522, etc.
Verify that the filter interface dimensions and frame structure match your original vacuum.
Designed specifically for RIDGID 3-4.5 gallon wet/dry vacuum cleaners, including (but not limited to) classic models such as:
Filter Type
Pleated HEPA Filter: Features a multi-layered accordion-style filter paper design to increase filtration surface area and enhance particle capture efficiency.
HEPA Standard: Must meet or exceed H11 rating, ensuring ≥99.97% filtration efficiency for 0.3-micron particles.
3.Installation Steps
Power off the vacuum and remove the old filter.
Clean the filter chamber of debris to ensure no residue remains.
Insert the new filter into the chamber, ensuring the interface is fully seated.
4.Regular Replacement
HEPA filters should be replaced every 6-12 months, depending on usage frequency and dust load.
Replace immediately if the filter is damaged, deformed, or shows reduced filtration efficiency.
Replacement Pleated HEPA Wet Dry Vac Shop Vacuum Filter compatible with Most 3-4.5 Gallon RIDGID Wet Dry vacuum cleaner parts,Model # VF3800
1. Fits most RIDGID wet dry vacuums 3 to 4.5 gal.
2. Durable HEPA vacuum filter can be used for wet and dry messes
3. 99.97% efficient at filtering dry particles 0.3 µm or larger
4. About This Product
The RIDGID Pleated HEPA Filter is designed to fit most RIDGID wet dry vacuums (3 to 4.5 gal.) to capture wet and dry messes. It can also be used with the RIDGID Ash and Grilling Vacuum (HDAV0500) to pick up cold ash.
5.Compatible with the RIDGID ash and grilling vacuum HDAV0500 for cold ash pickup only - not for drywall dust, fine powders or liquids pickup. Must be used within the RIDGID ash vac drum filter (VFA0500; sold separately) if using with the RIDGID ash and grilling vacuum. Do not operate without both filters installed
Compatible Models
WD4050, WD4070, WD4080, WD4522, etc.
Verify that the filter interface dimensions and frame structure match your original vacuum.
Designed specifically for RIDGID 3-4.5 gallon wet/dry vacuum cleaners, including (but not limited to) classic models such as:
Filter Type
Pleated HEPA Filter: Features a multi-layered accordion-style filter paper design to increase filtration surface area and enhance particle capture efficiency.
HEPA Standard: Must meet or exceed H11 rating, ensuring ≥99.97% filtration efficiency for 0.3-micron particles.
3.Installation Steps
Power off the vacuum and remove the old filter.
Clean the filter chamber of debris to ensure no residue remains.
Insert the new filter into the chamber, ensuring the interface is fully seated.
4.Regular Replacement
HEPA filters should be replaced every 6-12 months, depending on usage frequency and dust load.
Replace immediately if the filter is damaged, deformed, or shows reduced filtration efficiency.
