content is empty!
| Color: | |
|---|---|
| Material: | |
| Availability: | |
| Quantity: | |
MK-ZVC332SK
MINKANG
8508 7090

1.1 Set =1 Black Output HEPA filter+1 White Foam filter
2.Compatible with models:
3.A HEPA filter + Foam filter kit compatible with Zelmer and Bosch vacuum cleaners is designed to enhance filtration efficiency and maintain optimal suction performance.
HEPA Filter:
Captures 99.97% of particles as small as 0.3 microns, including dust, pollen, pet dander, and allergens.
Ideal for allergy sufferers and households requiring high air quality.
Foam Filter:
Acts as a pre-filter, trapping larger debris (e.g., hair, dirt) to protect the HEPA filter.
Extends the lifespan of the HEPA filter by reducing clogging.
Improved Air Quality: HEPA filtration reduces allergens and fine dust.
Extended Filter Life: The foam filter catches larger particles, preventing premature HEPA filter clogging.
Cost-Effective: Replacing both filters together is often cheaper than buying them separately.
Better Suction: Clean filters maintain optimal vacuum performance.
HEPA Filter: Replace every 6–12 months (depending on usage).
Foam Filter: Clean monthly (rinse with water, let dry completely) and replace every 3–6 months.






1.1 Set =1 Black Output HEPA filter+1 White Foam filter
2.Compatible with models:
3.A HEPA filter + Foam filter kit compatible with Zelmer and Bosch vacuum cleaners is designed to enhance filtration efficiency and maintain optimal suction performance.
HEPA Filter:
Captures 99.97% of particles as small as 0.3 microns, including dust, pollen, pet dander, and allergens.
Ideal for allergy sufferers and households requiring high air quality.
Foam Filter:
Acts as a pre-filter, trapping larger debris (e.g., hair, dirt) to protect the HEPA filter.
Extends the lifespan of the HEPA filter by reducing clogging.
Improved Air Quality: HEPA filtration reduces allergens and fine dust.
Extended Filter Life: The foam filter catches larger particles, preventing premature HEPA filter clogging.
Cost-Effective: Replacing both filters together is often cheaper than buying them separately.
Better Suction: Clean filters maintain optimal vacuum performance.
HEPA Filter: Replace every 6–12 months (depending on usage).
Foam Filter: Clean monthly (rinse with water, let dry completely) and replace every 3–6 months.






What is the replacement cycle for this set of filters (HEPA filter + sponge filter)?
——HEPA filter screen
Under normal circumstances: Replace it every 3 to 6 months. If the usage frequency is high or the environment has a lot of dust (such as having pets at home or having members prone to allergies), it is recommended to replace it every three months.
Observation status: If a large amount of dust accumulates on the filter screen, the filter screen turns black or has an unpleasant smell, even if it has not been three months, it should be considered to be replaced in advance.
——Sponge filter screen
Cleaning frequency: Clean 1 to 2 times a month to remove surface dust and maintain the filtration effect.
Replacement cycle: Replace every 3 to 6 months. If the filter screen is found to be damaged or cannot be restored to cleanliness after cleaning, it should be replaced in advance.
2.If there is a large accumulation of dust, how should it be dealt with?
——Stop using and cut off the power
Immediately turn off the vacuum cleaner and unplug the power to prevent the motor from overheating or further clogging by dust.
—— Remove the filter screen
Refer to the vacuum cleaner manual to find the position of the filter screen (usually behind or at the top of the dust box).
Carefully remove the filter screen to avoid dust scattering.
——Initially clean the dust
HEPA filter screen
Non-washable (Most HEPA filters will damage their structure when exposed to water).
Use a soft-bristled brush or vacuum cleaner (low gear) to gently brush the surface dust, or tap the filter screen to make the dust fall off.
Sponge filter screen
It can be removed and rinsed with clean water, or gently rubbed with a neutral cleaner to remove stubborn stains.
After rinsing, thoroughly squeeze out the water and let it dry in the sun until completely dry (avoid direct sunlight).
—— Check the condition of the filter screen
If the filter screen is damaged, deformed or cannot be cleaned thoroughly (such as dust seeping into the interior of the filter screen), a new filter screen should be replaced immediately.

What is the replacement cycle for this set of filters (HEPA filter + sponge filter)?
——HEPA filter screen
Under normal circumstances: Replace it every 3 to 6 months. If the usage frequency is high or the environment has a lot of dust (such as having pets at home or having members prone to allergies), it is recommended to replace it every three months.
Observation status: If a large amount of dust accumulates on the filter screen, the filter screen turns black or has an unpleasant smell, even if it has not been three months, it should be considered to be replaced in advance.
——Sponge filter screen
Cleaning frequency: Clean 1 to 2 times a month to remove surface dust and maintain the filtration effect.
Replacement cycle: Replace every 3 to 6 months. If the filter screen is found to be damaged or cannot be restored to cleanliness after cleaning, it should be replaced in advance.
2.If there is a large accumulation of dust, how should it be dealt with?
——Stop using and cut off the power
Immediately turn off the vacuum cleaner and unplug the power to prevent the motor from overheating or further clogging by dust.
—— Remove the filter screen
Refer to the vacuum cleaner manual to find the position of the filter screen (usually behind or at the top of the dust box).
Carefully remove the filter screen to avoid dust scattering.
——Initially clean the dust
HEPA filter screen
Non-washable (Most HEPA filters will damage their structure when exposed to water).
Use a soft-bristled brush or vacuum cleaner (low gear) to gently brush the surface dust, or tap the filter screen to make the dust fall off.
Sponge filter screen
It can be removed and rinsed with clean water, or gently rubbed with a neutral cleaner to remove stubborn stains.
After rinsing, thoroughly squeeze out the water and let it dry in the sun until completely dry (avoid direct sunlight).
—— Check the condition of the filter screen
If the filter screen is damaged, deformed or cannot be cleaned thoroughly (such as dust seeping into the interior of the filter screen), a new filter screen should be replaced immediately.